Removing An Sdhc Memory Card - Panasonic AG-CPD20P Operating Instructions Manual

Hide thumbs Also See for AG-CPD20P:
Table of Contents

Advertisement

SDHC Memory Card Insertion and Removal
(3) Close the SDHC Memory Card
slot cover.
Return the SDHC Memory Card
slot cover to its original closed
position and press the section
marked PUSH .
When you close the SDHC Memory
Card slot cover after inserting an SDHC
Memory Card, the [READY] lamp
indicates the recorder status.
(Refer to "Indicator Lamps and
Recorder Status" in Section 2:
Operation.)
(4) Remove the key.
Turn the key counterclockwise to
[
]
, and remove it.

Removing an SDHC Memory Card

(1) Open the SDHC Memory Card
slot cover (see previous page).
(2) Push the center of the card
until it clicks so that the
SDHC Memory Card pops out
then pull it out straight.
Note:
The [BUSY] lamp blinks for a few
seconds when the SDHC Memory
Card slot cover is opened. Make
sure that the blinking has stopped
before removing an SDHC Memory
Card.
Note:
If an SDHC Memory Card was
removed while it was being
accessed, the files may be
corrupted. The corrupted files are
automatically repaired.
(For details, refer to "Restoring
Files Automatically" in Section 2:
Operation.)
(3) Close the SDHC Memory Card
slot cover.
Return the SDHC Memory Card
slot cover to its original closed
position and press the section
marked PUSH .
(4) Remove the key.
Turn the key counterclockwise to
[
]
, and remove it.
(continued)
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents