• This set can be disassembled in the order shown below.
3-1.
DISASSEMBLY FLOW
SET
3-2. CABINET (UPPER) SECTION
(Page 5)
3-3. MECHANISM DECK (DLM3A23-11)
(When TRAY carries out movable.)
(Page 6)
3-5. CABINET (FRONT) SECTION
(Page 8)
3-6. CD LID ASSY
(Page 9)
Note: Follow the disassembly procedure in the numerical order shown below.
3-2.
CABINET (UPPER) SECTION
screw (B2.6)
screw (B2.6)
screw (M2.6)
screw (B2.6)
SECTION 3
DISASSEMBLY
Note 1: The process described in
Note 2: Without completing the process described in
3-4. MECHANISM DECK (DLM3A23-11)
(When TRAY does not carry out movable.)
(Page 7)
3-7. OPTICAL PICK-UP BLOCK
(KSM-213CCP)
(Page 9)
3-8. HOW TO PULL OUT TRAY
(Page 10)
3-9. BELT (DLM3A)
six screws (B2.6)
five screws (B2.6)
can be performed in any order.
, the next process can not be performed.
(Page 10)
three screws (B2.6)
cabinet (upper) section
screw (B2.6)
connector (CN417)
ICF-CDK70
5