Dashboard Mount Disk; Use Of The Mount Accessories - Nextar M3-04 Hardware Instruction Manual

Use of the Mount
Accessories
When using the unit in vehicle, you can use the supplied mount accessories (mount
bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take
the following steps to operate:
Fig. 1
1. See Fig. 1. Following the arrow, slide the mount cradle onto the mount bracket to
fix it.
2. See Fig. 2. First, set the bottom edge of the unit onto the mount cradle. Then press
the two buttons in arrow ① direction and meanwhile push the mount cradle
forwards to embed it in the unit.
3. See Fig. 3. Lift the suction cup lever and then press the suction cup to the
Following the arrow ①,
windshield.
the knob to adjust the unit to proper position.
To mount to dashboard, use the included adhesive disk. Choose a clean, dry spot
on your dashboard, peel off protection liner from the back of the disk, and then
attach the disk to your dashboard.
Warning:
The device must not be mounted so that it impairs the driver's view of the road. Please
take extra precaution to ensure the airbags are not obstructed by the device.
Fig. 2
press down the suction cup lever. Then rotate
20
Fig. 3