Revision History - D-Link DFL-800 Application Note

Date Rev.
Interoperability Compliance Testing Negotiate mode for
2009-4-24 1.0 Phase1 and Phase2 using TheGreenBow VPN Client
software and D-Link product's DFL-800.
Added the function VPN User Authentication using
TheGreenBow VPN Client software (X-Auth) and DFL- 800
2009-5-28 2.0
(External Radius Server) and changed the network
diagram.
1. Introduction
The objective of this document is to provide a guide describing how to configure the
devices to achieve the same environment as show at the network topology.
Users of this document are expected to already possess basic knowledge of D-Link
devices and TheGreenBow VPN software, and are familiar with how to perform basic
configurations. Only important configurations, such as those pertaining to interfacing and
integrating, will be described in this document.
For purpose of reference, configuration files for each device are available for download.
2. Audience
This document is intended for project engineers or end users that need to implement
DFL series and TheGreenBow software at the sites.
Objective
3.
This topology consist the scenarios that integrates using TheGreenBow VPN program
and D-Link Firewall and demonstrate integrations and network solutions to OBUs, and in
addition, to Partners and Customers from D-Link International.
List of Equipment and Software
4.
The table below shows the devices information.
Device No.
1
2
3

Revision History

Description
Device Name
TheGreenBow VPN Client Software
Netdefend IPS Firewall
WinRadius Radius Server
D-Link International
Confidential and proprietary
Device Model Firmware
- 4.6x
DFL-800 2.20.03.08-8257
- 4.00
Editor
John Yoong
John Yoong
2