Table of Contents
Advertisement
AtlantisLand I-Storm Lan Router ADSL
2. Encapsulation: 1483 Bridged IP LLC
3. Bridged: Disabled
4. NAT Configuration: Dynamic NAPT
Please see scenario 2: Router Mode Configuration with Dynamic IP in Appendix for more detail
configuration.
8.2 Static IP for WAN IP (RFC 1483 ROUTED)
Following settings are necessary when working under this mode:
1. VPI/VCI
2. Static IP Address: provided by ISP
3. Subnet Mask: provided by ISP
4. Default Gateway: provided by ISP
5. Encapsulation: 1483 Bridged IP LLC or 1483 Routed IP LLC (provided by ISP)
6. Bridged: Disabled
7. NAT Configuration: Dynamic NAPT
8. Preferred DNS server: IP is Provided by ISP
Please see scenario 3: Router Mode Configuration with Static IP in Appendix for more detail
configuration.
8.3 PPPoA ( RFC 2364)
PPP is a widely used protocol for controlling a point-to-point link. It is used by existing ISPs (Internet
Service Providers) in providing dial-in services for the Internet. It can be used over a variety of
physical media to transport IP data, MAC data, and many other data types. Components of PPP have
been defined which provide option negotiation, compression, encryption, authentication and multi-link
facilities. For xDSL deployment, authentication is probably the single most important of these.
Following settings are necessary when working under this mode:
1. VPI/VCI
2. Encapsulation: PPPoA VC-Mux
3. Bridged: Disabled
4. PPP User Name: Provided by ISP
5. PPP password: Provided by ISP
6. NAT Configuration: Dynamic NAPT
Please see scenario 4: Router Mode Configuration PPPoA in Appendix for more detail configuration.
8.4 PPPoE ( RFC 2516)
Following settings are necessary when working under this mode:
1. VPI/VCI
2. Encapsulation: PPPoE LLC
16
Advertisement
Table of Contents
