Eco+ Mode; Name The Handset; Set The Date And Time; Set The Display Language - Philips X200 Extended User Documentation

ECO+ mode

Note
•
This feature is available only on the cordless handset.
When the ECO+ mode is activated, it
eliminates the radiation of the cordless handset
and base unit in standby mode.
1
Press MENU.
2
to select [Phone setup]
Press /
>[ECO+ mode], then press OK to
confirm.
3
Select [On]/[Off], and press OK to
confirm.
» The setting is saved.
» ECO+ is displayed in standby mode.
Note
•
Make sure that all the handsets registered to the base
unit are X200 in order to have the ECO+ feature
functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base unit is not
transmitting any signal in standby mode; therefore the
cordless handset needs to "listen" more frequently for
signals from the base unit to detect incoming calls or
other requests from the base unit. The time it takes for
the cordless handset to access features like call setup,
call log, paging, and phonebook browsing is also delayed.
The cordless handset will not alert you to link loss in
case of power loss or moving out of range.

Name the handset

The name of the handset can be up to 12
characters. It is displayed on the screen in
standby mode.
1
Press MENU.
2
to select [Phone setup] >
Press /
[Phone name], then press OK to confirm.
3
Enter or edit the name. To erase a
character, press REDIAL/C.
4
Press OK to confirm.
» The setting is saved.

Set the date and time

For information, see 'Set the date and time' in
the 'Get started' section.

Set the display language

Note
•
This feature only applies to models with multiple-
language support.
•
Languages available vary from country to country.
1
Press MENU.
2
Press / to select [Phone setup] >
[Language], then press OK to confirm.
3
Select a language, then press OK to
confirm.
» The setting is saved.
EN 23