Pioneer VSX-C402-S Service Manual page 108

1
Display
A
9
B
1 DIG (digital) / ANA (analog)
Indicates whether the current input source is analog or
digital.
2 Hi-FS
Lights when the current input signal is 88.2/96 kHz
digital.
3 SR+
Lights when the Control Mode Setting is set to SR+ ON
for a connected plasma display to control this receiver.
4 Sleep timer indicator
C
Lights when the sleep timer has been set.
5 DIALOG indicator
Lights when Dialog Enhancement is on.
6 Input/output channel indicators
The letters L, C, R, LFE, Ls and Rs indicate the input
channels coming into the receiver. The segments and
SW (subwoofer) indicate the active speaker output
channels.
7 VIR.SB indictor
Lights when the Virtual Surround Back effect is on.
D
8 OVER
Lights when the input signal is too high, risking
distortion. Use the input attenuator to reduce the level.
9 Tuner indicators
STEREO
Lights when listening to a stereo FM broadcast in
auto/stereo mode.
TUNED
Lights when tuned to a broadcast.
E
MONO
Lights when the tuner MPX mode is set to mono.
RDS
Lights when listening to a station that is
broadcasting RDS information.
RF ATT
Lights when the RF attenuator is switched on.
F
108
1
2
1 2 3
10
VSX-C402-S
2
3
4 5 6
10 Character display
11 EON indicators
EON lights when EON is set. The dot indicator to the left
lights when the current broadcast carries the EON data
service.
12 Volume level indicator
Indicates the volume level in dB.
3
4
7 8
11 12
4