Samsung GT-S3600L Service Manual page 54

Exploded View and Parts List
5
1) Insert F-PCB to hole of FRONT.
2) Assemble while pressing the hinge.
- Beware that you do not damage F-PCB
when you insert F-PCB to hole of FRONT
- Open and close a folder 2~3 times to
Check there is a problem or not.
7
1) Set the PBA on the FRONT.
2) Screw up one screw at PBA
3) Joint LCD CONNECTOR, KEY
CONNECTOR,
INTENNA CONNETOR.
- Be careful not to damage LCD FPCB
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Assemble FRONT and DECO
2) Screw up one screw at FRONT
- Be careful not to make scratch and molding damage.
8
1) Set the Volume key on the FRONT
2) Assemble FRONT and REAR
- Be careful not to make scratch and molding damage
11-6