Table of Contents
Advertisement
Your icemaker til produce eight cub per cycle
approximately 100 cubes in a 24hour period, depending
on freezer compartment tem~rature, room temperature,
number of door openings and other use conditions.
If your refrigerator
Icemaker
is operated before
water connection
is made to the
icemaker, keep the
icemaker feeler arm
in the STOP (up)
position.
When the
refrigerator has
been connected to
the water supply,
move the feeler arm
to the ON (down)
position. The ice
cube mold will
with water after
cooling to freezing
several hours. When cubes are solidly frozen, they will
be ejected from the mold into the ice storage bin by
means of a sweeper arm. Icemaking will continue until
the feeler arm rests on the ice cubes in the storage bin.
For maximum ice storage, level the stored cubes with
your hand occasionally. Be sure nothing interferes
with the swing of the feeler arm.
Water Ffiter Accessory
Your ice cubes can only be as fresh-tasting ~
as the water that produces them. That's why
Rigid, porous graded density depth
cellulose fiber cartridge catches dirt,
rust particles, sand and salt.
Activated charcoal granules
remove musty, stale odors.
Activated charcoal granules remove oily,
REDUCES SCALE
Special crystis reduce hard scale deposit formation.
(on some models)
The icemaker ejects cubes in groups of eight and it is
normal for several cubes to be joined together.
Once your icemaker is in operation, throw away the
first few batches of ice cubes. This will flush away
any impurities in the water line. Do the same thing after
Feeler arm in
vacations or extended periods when ice isn't used.
STOP
position
Move the icemaker feeler arm to the STOP (up)
position when:
Home water supply is to be off for several hours.
Ice storage bin is to be removal for a period of time.
Going away on vacation.
If ice is not used often, old cubes will become cloudy
and taste stie and will shrink. Empty the ice storage
bin periodically and wash it in lukewarm water.
Feeler arm in
ON (down)
sounds that may be unfamiliar. They are normal
position
The water filter is an option at extra cost
and is available from your Hotpoint deder. Specify
and installs in minutes on 1/4" O.D. copper water line.
Water Supply Mt
A kit containing copper tubing, shut-off vrdve, fittings
and instructions needed to connect the icemaker to
your cold water line is available at extra cost. See
Preparation section.
Automatic Icemaker Accmsory Kt
If your refrigerator did not come *eady quipped
with an automatic icemaker, an Icemaker Accessory
Kit is available at extra cost. Check the back of the
/Y
refrigerator for the specific icemaker needed for
your model.
7
Advertisement
Table of Contents
