Measure the clearance between the reverss idler
gear and the reverse change holder.
Standard:
0.5 - 1.1 mm (0.02 - 0.04 inl
Sorvico Limit: 1.8 mm (0.07 inl
4.
lf the clearance is more than the service limit, mea-
sure the width ofthe reverse change hold6r.
St.ndrrd: 13.0 - 13.3 mm (0.512 - 0.52/t inl
lf the width is not within the standard, replace
the reverse change holder with a new one.
lf the width is within the standard, reolaco the
reversa idler gear with a new one.
REVERSE CHA'{GE HOLDER
REVERSE CHANGE HOTI'ER
Reverse Change Holder, Reverse ldler Gear
Clearance Inspection lcont'd)
Removal
1. Removo the reverse change holder.
2.
Remove the revorss idler g€ar, th€ rev6rs6 idlsr
gear shaft, and the washor {B18Cl engine}.
REVERSE IDI.TR
GEAF SHAFT
13-12
REVERSE CHAMiE HOII'ER