ASSEMBLY
Handle Installation
Install the handle assembly on the generator upper frame using the 12
mm washers, spring washers and handle holder bolts.
TORQUE: 17–22 lbf·ft (24–29 N·m, 2.4–3.0 kgf·m)
HANDLE HOLDER BOLT (2)
SPRING WASHER (2)
12 mm WASHER (2)
HANDLE ASSEMBLY
To extend handle:
Raise the handle to the horizontal position. The handle will click into
place when locked.
Pressing down on the handles may damage the handle holder
assembly. Only pull up on the handles to move the generator.
HANDLE LEVER
HANDLE
97