Side Stand - Honda 2012 NC700D Owner's Manual

12 NC700D (NM-2)(TH)-32MGS8000.book 77 ページ ２０１２年４月１８日 水曜日 午後９時３分

Side Stand

Side stand
spring
1. Park your motorcycle on its centre stand
on a firm, level surface.
2. Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean grease.
3. Check the spring for damage or loss of
tension.
4. Sit on the motorcycle and raise the side
stand.
5. Start the engine and press the D/S side of
N-D switch to switch the transmission into
D mode.
6. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your motorcycle inspected by your dealer.
77