Front Panel Description - Tanglewood T6 Owner's Manual

FRONT PANEL DESCRIPTION

2 3 4
CONTOUR
CLIP
HIGH
LOW
INPUT
GAIN BASS
1 6 7
CH1 ACOUSTIC
1. INPUT: Input jack for acoustic guitar (6.35mm)
2. HIGH/LOW: Input select control for acoustic guitar. Select "HIGH" when
connecting guitar of low output.
3. CLIP: CH1 indicator for overdrive of pre-amp signal.
4. CONTOUR: Brightness control, increasing brightness of acoustic guitar.
5. CONTOUR INDICATOR.
6. GAIN: CH1 gain control. When indicator of Clip overdrive is on, turn down
the GAIN to prevent distortion.
7. BASS: Boost/cut +/- 10dB of low frequency.
8. MIDDLE: Boost/cut +/- 10dB of middle frequency.
9. TREBLE: Boost/cut +/- 10dB of high frequency.
CH2 MIC
10. INPUT: Input jack for MIC (6.35mm)
11. LINE/MIC: Select button for LINE/MIC input.
12. CLIP: CH2 indicator for overdrive of pre-amp signal.
13. GAIN: CH2 gain control. When indicator of Clip overdrive is on, turn down
the GAIN to prevent distortion.
14. BASS: Boost/cut +/- 10dB of low frequency.
15. TREBLE: Boost/cut +/- 10dB of high frequency.
EFFECT CH
16. EFF.PAN: Assign effect level to a specific channel.
17. MODE: Effect select control (Hall, Plate, Chorus, Delay).
18. LEVEL: Effect level output control.
19. MASTER: Master volume control.
20. POWER INDICATOR.
5 10
CHI ACOUSTIC
INPUT
BALANCED
MIDDLE TREBLE
8 9
11 12
CH2 LINE/MIC
CLIP
LINE
MIC
GAIN BASS TREBLE
13 14 15
16
EFFECTS
1.HALL
2.PLATE
3.CHORUS
4.DELAY
EFF.PAN MODE LEVEL
2 3
1 4
CH1 CH2
17 18
20
POWER
MASTER
19