Discs - Panasonic SC-PMX4 Operating Intstructions

Discs

Basic play Basic play
CD MP3
1
Press [y/l] to turn the unit on.
2
Press [0] to open the disc tray and then load the disc.
Press [0] again to close the tray.
3
Press [6, CD] to start play.
4
Adjust the volume.
Stop playback
Pause play
Skip tracks
Search through tracks
Skip album
Play Mode function
CD MP3
1
Press [6, CD].
2
Press [PLAY MODE] to select the desired mode.
1-TRACK
1TR
1-ALBUM
1ALBUM
RANDOM
RND
1-ALBUM RANDOM
1ALBUM RND
Note:
• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
tracks that have been played.
• The current play mode is cleared when you open the disc tray.
CD
• During RANDOM play, you can search backward or forward only
within the current track.
8
8
PMX4_EP_EN.indd 8 PMX4_EP_EN.indd 8
Label must face upward
Disc tray
Press [7] (stop).
Press [6, CD]. Press again to resume
play.
Press [4/ ] or [¢/ ].
OR
Press the numeric buttons.
CD
Press and hold [4/ ] or [¢/ ] during
play or pause.
MP3
Press [5/∞, ALBUM].
Play one selected track on the disc.
Press [4/ ] or [¢/ ].
OR
Press the numeric buttons to select the
track.
MP3
Play one selected album on the disc.
Press [5/∞, ALBUM] to select the album.
Play a disc randomly.
MP3
Play all tracks in one selected album
randomly.
Press [5/∞, ALBUM] to select the album.
Display function
This function allows you to display the information of the current
track.
Press [DISPLAY] repeatedly during play or pause.
CD
Elapsed play time
MP3
Elapsed play Remaining
time play time
Playing bit rate
ID3 (Artist)
(during play only)
Note:
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
the track.
Advanced play Advanced play
Repeat play
You can repeat program play or other selected play mode.
CD MP3
Press [REPEAT] before or during play.
"REPEAT ON" and " " are displayed.
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "
Program play
This function allows you to program up to 24 tracks.
CD
1
Press [6, CD] and then [7] (stop).
2
Press [PROGRAM].
3
Press the numeric buttons to select your desired track.
Repeat this step to program other tracks.
4
Press [6, CD] to start play.
MP3
1
Press [6, CD] and then [7] (stop).
2
Press [PROGRAM].
3
Press [5/∞, ALBUM] to select your desired album.
4
Press [¢/ ] once and then the numeric buttons to select
your desired track.
5
Press [OK].
Repeat steps 3 to 5 to program other tracks.
6
Press [6, CD] to start play.
For two-digit track, press [h10] once, and then the two digits.
For three-digit track, press [h10] twice, and then the three digits.
Remaining play time
Album name Track name
ID3 (Track) ID3 (Album)
" is cleared.
12/23/08 2:37:42 PM 12/23/08 2:37:42 PM