Updating Of The Firmware - Pioneer CDJ-350 Service Manual

5

8.4 UPDATING OF THE FIRMWARE

The device and updater file name for update is the following.
Device
MAIN MAIN CPU
A version is not contained in a file name.
When USB memory is used
Please use USB memory formatted by FAT32. It does not correspond to HFS+.
1 A file to update is copied to USB memory.
2 Please turn on a power supply, pushing both the buttons of SOURCE SELECT/USB and RELOOP.
(Please continue pushing until "DOWNLOAD" screen appears.)
3 The FL is displayed the following screen during update.
In the display example, show it is updating to 1.01 from Ver. 1.00.
4 Since the message of "COMPLETE" will be displayed if update is completed,
please return on a power supply.
When CD-R/RW is used
1 A file to update is copied to CD-R/RW.
2 Please turn on a power supply, pushing both the buttons of SOURCE SELECT/DISC and RELOOP.
(Please continue pushing until "DOWNLOAD" screen appears.)
3 The rest is the same as that of the case where USB memory is used.
Recovery when failing
When the power supply has been turned off on the way, subsequent normal operation becomes impossible.
When the error code of "E-7024" is displayed, the recovery mode operates when performing the update procedure
mentioned above again, and update is performed.
In this case, please carry out by USB memory in recovery. CD-ROM cannot be used.
5
6
File Name
C350MAIN.UPD
CDJ-350
6
7
7
8
A
B
C
D
E
F
47
8