Ani; Apf; Bat; Bau - AMX MST-1001 Configuration Manual

Button Commands

^ANI

^APF

^BAT

^BAU

^BCB

Modero S Series Touch Panels - Configuration & Programming Manual
Run a button animation (in 1/10 second).
• Syntax:
"'^ANI-<vt addr range>,<start state>,<end state>,<time>'"
• Variables:
variable text address range = 1 - 4000.
start state = Beginning of button state (0= current state).
end state = End of button state.
time = In 1/10 second intervals.
• Example:
SEND_COMMAND Panel,"'^ANI-500,1,25,100'"
Runs a button animation at text range 500 from state 1 to state 25 for 10 second.
Add page flip action to a button if it does not already exist.
• Syntax:
"'^APF-<vt addr range>,<page flip action>,<page name>'"
• Variables:
variable text address range = 1 - 4000.
page flip action =
Stan[dardPage] - Flip to standard page
StanAni[mated] - Flip to standard page using an animated transition (3 extra parameters)
Prev[iousPage] - Flip to previous page
Show[Popup] - Show Popup page
Hide[Popup] - Hide Popup page
Togg[lePopup] - Toggle popup state
ClearG[roup] - Clear popup page group from all pages
ClearP[age] - Clear all popup pages from a page with the specified page name
ClearA[ll] - Clear all popup pages from all pages
page name = 1 - 50 ASCII characters.
• Example:
SEND COMMAND Panel,"'^APF-400,Stan,Main Page'"
Assigns a button to a standard page flip with page name 'Main Page'.
Append non-unicode text.
• Syntax:
"'^BAT-<vt addr range>,<button states range>,<new text>'"
• Variables:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
new text = 1 - 50 ASCII characters.
• Example:
SEND_COMMAND Panel,"'^BAT-520,1,Enter City'"
Appends the text 'Enter City' to the button's OFF state.
Append unicode text. Same format as ^UNI.
• Syntax:
"'^BAU-<vt addr range>,<button states range>,<unicode text>'"
• Variables:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
unicode text = 1 - 50 ASCII characters. Unicode characters must be entered in Hex format.
• Example:
SEND_COMMAND Panel,"'^BAU-520,1,00770062'"
Appends Unicode text '00770062' to the button's OFF state.
Set the border color to the specified color. This applies only if the specified border color is not the same as the current color.
Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or RRGGBBAA).
• Syntax:
"'^BCB-<vt addr range>,<button states range>,<color value>'"
• Variables:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
color value = Refer to the RGB Triplets and Names For Basic 88 Colors table on page 90 for more information.
• Example:
SEND_COMMAND Panel,"'^BCB-500.504&510,1,12'"
Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color name, R,G,B, alpha colors
(RRGGBBAA) and R, G & B colors values (RRGGBB).
Programming
50