Linksys WRT54G Quick Installation Manual page 3

F
Power on the following devices
in this order: cable or DSL
modem, Router, and PCs.
G
Connect the AC Power
Adapter to the Power port and
the other end into an electrical
outlet.
H
Make sure the Power and Inter-
net LEDs on the front panel
light up green.
I
The Power LED will flash green
for a few seconds when the
Router goes through its self-
diagnostic test. This LED will stay
solid when the self-test is com-
plete. If it does not stop flash-
ing, refer to "Appendix A:
Troubleshooting" of the User
Guide on the Setup CD-ROM.
Proceed to Step 2.
G
Make sure to use
IMPORTANT:
the power adapter that is sup-
plied with the Router. Use of a
different power adapter could
damage the Router.
3