Dukane 8980WU User Manual page 75

SETUP menu
Item Description
PATTERN
Select PATTERN with ▲/▼ buttons.
Displayed pattern [Off/1/2/3/4/5/6] can be switched with ◄/► buttons.
PATTERN 1: Frame
GEOMETRY
PATTERN 2: Red Grid
CORRECTION
PATTERN 3: Green Grid
(continued)
PATTERN 4: Blue Grid
PATTERN 5: Vertical 9 steps
PATTERN 6: Horizontal 9 steps
OFF: Displays the input signal.
Selecting this item displays the LAMP
& FILTER menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to
execute the item.
ECO MODE
Using the ▲/▼ buttons switches the Eco mode.
NORMAL ó ECO
• When the item other than NORMAL is selected, acoustic noise and
screen brightness are reduced.
LAMP & FILTER
LAMP TIME
The lamp time is the usage time of the lamp, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
CANCEL ð OK
• For the lamp replacement, see the section Replacing the lamp
108
( ).
31
• The lamp time can be checked also with the Status Monitor ( ).
• The IMAGE OPTIMIZER function does not work properly unless
LAMP TIME is initialized when replacing a lamp.
(continued on next page)
75