Dukane 8980WU User Manual page 19

Connecting with your devices (continued)
About HDBaseT™ connection
• HDBaseT is a technology to transmit image, sound, ethernet or serial control
signal via LAN cable.
• Please go to the following URL regarding the device of other company that
supports HDBaseT and has been confirmed compatible with this projector.
LAN or HDBaseT input port can be selected as ethernet signal input by
switching in the menu.
• Use LAN cables of up to 100m long. Exceeding this length, the image
and sounds will be deteriorated, and even experience malfunction on LAN
transmission.
NOTE • The HDMI ports of this model are compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players or the like.
- The HDMI ports support the following signals:
For Video signals, refer to User's Manual (detailed) Technical.
Audio signal : Format Linear PCM
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Qualified cable is required for HDBaseT connection.
- Be sure to use an HDMI
- Use a Category 2-certified HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
DVI to HDMI
TM
• The HDMI cables might come off easily due to the lack of a mechanical lock
TM
on the cables and connectors. It is recommended to fasten the HDMI cables by
using the HDMI cable holder and the Cable tie to prevent them from coming off
(23).
(continued on next page)
www.dukaneav.com
Sampling frequency 48kHz / 44.1kHz / 32kHz
cable that has the HDMI
TM
cable to connect with the HDMI
cable to input 1080p@50/60 signal to the
TM
TM
logo.
TM
input.
Setting up
TM
19