Table of Contents
Advertisement
Hardware Configuration
Connect VGA
cable between
monitor and kit
Mstar ISP Utility Configuration:
Launch the utility of "ISP_Tool Winbond 0315.exe"
Press Config button
6. Firmware Upgrade Process
Select AUTO DETECT button that will automatically detect
the device then shows "OK" on the right side.
S2. Press [Connect] button.
Connect printer
cable between
PC and kit
There s a Dialog window shown on the screen. It is the
meaning of connection successful .
Check the video cable and ISP board (D-sub to Printer
port) between LCD monitor to PC host to see if it
disconnected.
31
ACER G24
Go to cover page
Advertisement
Table of Contents
