Table of Contents
Advertisement
ACER G24
24
5. Troubleshooting (continued)
Go to cover page
5.5 Abnormal OSM display - OSD Adjusment Problem
Failure Point
Check the input TTL level
1. Printed wire is broken between P303 pin 2 and I306 pin 87.
whether if it was altered upon
NG
2. Printed wire is broken between P303 pin 3 and I306 pin 88.
pressing the function keys.
3. Printed wire is broken between P303 pin 4 and I306 pin 89.
4. Printed wire is broken between P303 pin 5 and I306 pin 90.
5. Printed wire is broken between P303 pin 6 and I306 pin 22.
6. Printed wire is broken between P303 pin 7 and I306 pin 1.
7. C325, C326, C327, C328, C329,C330 is short.
OK
8. R339, R340, R341, R342, R343, R346, R347, R348,
R349, R350 ,R351, R352 is short or open.
9. I306 is defected.
(Note: more than one components defected is possible.)
Proceed to "5.4 Abnormal Section"
Advertisement
Table of Contents
