Connection Usin Aux Input; Fm/Usb Charging; Auto Standby/Wake Up; Connect Microphone - Monster Nomad User Manual

Press the Source button until "Aux" mode is displayed on LED screen

Connect Microphone

Connect Microphone
- First plug the supplied "Mic/Guitar" adapter (6.5mm to 3.5mm) to the input
labeled "MIC/Guitar" above the Volume knob
- Once the microphone is plugged in select the "MIC/Guitar" button to Mic position
- Now control your microphone volume on the smaller knob on the far left of the dashboard of the speaker
*Make sure your microphone is also switched to "On"
FM / USB Charging
Listening to FM radio
- Press the "Source" button to select FM source, the radio
station frequency will be displayed on the screen.
- Press and hold (  or ) to search a station with
strongest reception automatically.
Store your favorite four radio stations manually
- Tune to the desired radio station.
- Press and hold a number key (1-4) to enter programming
mode; the corresponding number blinks on the screen;
and the station to save on the selected preset.
- Repeat above steps above to store additional stations.
Select a favorite radio station
- Press the "Source" button to select FM source.
- Press the number 1-4 keys to select one of your favorite
radio stations to listen.
USB Charging (5V/2A)
- With the built in USB power bank, connect your USB
cable to USB power ports. You can
connect an iPhone, iPad, or any Android device.
(USB cable not included)
AUTO STANDBY/ WAKE UP
Auto Standby:
The Power Red LED Signal will turn on and other LED Signals will turn off once the main unit is in Standby mode.
- Bluetooth: When there is no BT Connection, or there is a BT Connection failure, or if the BT has
been disconnected for 15 Minutes, the set will go to standby mode and the BT LED Signal will turn off.
- AUX: The main unit will enter standby mode when the main unit is in Aux mode and no Aux cable has
been detected for 15 minutes.
- Work Mode: When the main unit is in work mode, pressing and holding the volume knob key for
3 seconds will auto enter the unit to Standby Mode.
"Wake up" from standby mode:
If the main unit is in Standby mode, press and hold the volume knob for 1 second. The main unit will turn on
and return to the latest source mode.
6