Dhcp - Tenda F300 User Manual

3.8 DHCP

The Dynamic Host Configuration Protocol (DHCP) is an automatic
configuration protocol used on IP networks. If you enable the
built-in DHCP server on the device, it will automatically configure
the TCP/IP settings for all your LAN computers (including IP
address, subnet mask, gateway and DNS etc), eliminating the
need of manual intervention. Just be sure to set all computers on
your LAN to be DHCP clients by selecting "Obtain an IP
Address Automatically" respectively on each such PC. When
turned on, these PCs will automatically load IP information from
the DHCP server. (This feature is enabled by default. Do NOT
disable it unless necessary)
Wireless N300 Home Router
42