Optional Parts - Fujitsu AU*A45LCLU Series Design & Technical Data

1-13.

OPTIONAL PARTS

Exterior Parts name Model No.
Air outlet
UTR-YDZC
shutter plate
Wide panel UTG-AGYA-W
Panel spacer UTG-BGYA-W
IR Receiver kit UTY-LRH  A1
Wired remote
UTB-  UD
controller
Insulation kit
UTZ-KXGA
for high humidity
External
UTY-XWZX
connect kit
External
UTD-ECS5A
control set
- (01 - 31) -
Summary
Air outlet shutter plate is
installed at the air outlet when
3-way direction is performed.
Wide panel hides the gap
between the ceiling hole and
the Decoration panel.
Installation in a space of 256mm
or greater is possible by using
panel spacer when the height
behind the ceiling is low.
(Normal behind the ceiling
installation height is 298mm.)
Unit control is performed by
wireless remote controller
Unit control is performed by
wired remote controller
Install when the under roof
condition is expected to be the
humidity of over 80% and the
temperature of over 30 °C
Use to connect with various
peripheral devices and air
conditioner PC board.
Use to connect with various
peripheral devices and air
conditioner PC board.