Camera Utility Ipview Pro Operation; Installation - Planet ica-210w Manual

Wireless setting: (ICA-210W only)
ESSID (Extended Service Set ID):
This field is used to setup which wireless network to be connected for ICA-210W
communication. The ESSID is a unique identifier shared among all clients in a
wireless network environment. To connect ICA-210W to a specific access point on
the network, make sure to enter the ESSID of ICA-210W to correspond with the
access point's ESSID for communication.
No Encryption
Default setting. It is strongly recommended to change to other encryption method
for security purpose.
WEP:
While enabling WEP Encryption, please select the encryption format ASCII or HEX
and enter the relevant data in the code key box. Please refer to User's Manual on
bundled CD for detailed information about configuring WEP parameters.
WPA:
Enter the name in the WPA-PSK (Share key) box, and this name must match the
Preshared key value in the remote device.
Setup
After making sure all settings are correct, click on the "Setup" button to store the settings
and complete the configurations.

Camera Utility IPView Pro operation

As a standalone, network camera, you can use the web browser to view the images;
however, the software IPView Pro in the CD-ROM enables the system administrator up to
16 cameras centralized management.

Installation

STEP 1
Run the "IPView Pro" software under the Utility Installation directory from autorun CD.
If the autorun screen is not shown, you can start the installation as follows.
1. Click on Start Menu/ Run.
2. Enter "D:\UTILITY\IPViewPro\ipviewprosetup.exe" in the appeared box, where
"D" is the letter of your CD-ROM drive.
3. Click on "OK" button.
6