Table of Contents
Advertisement
更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
8.2.5
Press the
BIN
button to select the bin file which will be
programmed into the flash.
The toolbar will be changed as Diagram 3.
8.2.5.1 (Configure)
Press the
CONFIG
button to open the Config Dialog(Diagram 4),
in this dialog, please select the correct
input or select the correct StartAddress.
These information will be saved into the ISPWriter3.ini file. You
can directly edit the ISPWriter3.ini file by editing tool.
Diagram 4
8.2.6
Enter the ISP mode
You will see some information in the textbox when CPU enters the
ISP mode.
Just like below:
PH_ISP_VER003 , Please use ISPWriter3 !!!
ISPWriter3:
UART:115200,n,8,1
Version: 3.01
BuildTime:Apr 19 2006-11:10:51
8.2.6.1
CPU enters ISP mode by hardware way, if PC software (
ISPWriter3.exe) does not send any data during 30 seconds, the
CPU will leave ISP mode and go on to continue normal boot
operation (To run TV application).
8.2.6.2
When the system power-on, if the "Power" key on keypad is
pressed and be keep for 3 seconds, the CPU will enter ISP mode
and send information by UART.
8.2.7
Program
Press the
PROG
button to start the programming.
8. Alignments
CPU Maker Chip
and
8.2.8 Reboot
After finish the programming, AC power OFF à ON can
reboot the system.
TPT1.1A LA
77
Hide quick links:
Advertisement
Table of Contents
