Philips 37TA2800/79 Service Manual page 17

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
Step 8. Remove the Front Bezel assy
a. Remove the 33 screws as Fig.11.
4. Mechanical Instructions
Fig.8
Fig.9
Fig.10
as Fig.11.
Fig.11
Fig.12
Insulation material
Service position
Notes: Please add insulation material between board and panel to
avoid short ciucuit.
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
and connected in their original position.
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
their places.
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
17
TPT1.1A LA
Fig.13