Using The Appliance - Philips AVENT SCF286 User Manual

Note: When you fill the small basket, put the teats on the bottom, place the screw rings loosely on top of
the teats and clip the bottle caps onto the two pillars in the small basket.
Note: Make sure all parts that need to be sterilised are completely disassembled and place them in the
basket with their openings pointing down to prevent them from filling up with water.

using the appliance

Only place items in the steriliser which are suitable for sterilising. Do not sterilise items that are
filled with liquid, e.g. a teether with cooling fluid.
Note: Before you sterilise bottles and other items, clean them first.
1 Use for example a baby bottle and pour exactly 100ml tap water directly into the water
reservoir of the base (Fig. 2).
2 Assemble the steriliser (see section 'Assembling the steriliser') and place the items to be
sterilised in it.
3 Place the lid on top of the small or large basket (Fig. 5).
4 Put the plug in the wall socket.
5 Press the power-on button to switch on the appliance (Fig. 6).
Note: If you plug in the appliance after you have pressed the power-on button, the steriliser starts to heat
up immediately.
SCF287/SCF286
The sterilising light lights up to indicate that the appliance starts operating.
,
When the sterilisation process is finished, the ready light goes on. After 3 minutes the ready
,
light goes out to indicate that you can now safely open the steriliser.
SCF285/SCF284
The sterilising light lights up to indicate that the appliance starts operating.
,
When the sterilisation process is finished, the appliance switches off automatically.
,
6 Remove the lid.
Wait until the appliance has cooled down before you remove the lid.
Be careful, hot steam may come out of the steriliser.
7 Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful, the sterilised items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the sterilised items.
8 Unplug the appliance and wait until the appliance has cooled down completely.
9 Pour out any remaining water from the water reservoir and wipe the water reservoir dry.
Note: The appliance does not work for 10 minutes after a sterilising cycle; it needs to cool down first.
EngliSh
9