GETTING STARTED Check Package Contents for: 1.) One HMPS2U Wireless Multifunction USB Device Server 2.) Setup CD with Wireless Multifunction USB Device Server Software 3.) One DC 12V/1.5A Power Adaptor 4.) One Quick Installation Guide (QIG) System Requirements: - Windows 2000 / XP / Vista / 7 - Mac OS 10.5 - 10.7...
PRODUCT OVERVIEW Front View Back View Antenna for WiFi capability USB 2-4: USB Ports for USB Devices LAN: 10/100M Ethernet USB Port LED 1-4: Lit when a USB device is plugged into Init: Reset button, press and hold for the corresponding port on 30 seconds to restore to factory the back default.
Step 2: Connecting Your Server to a Network 1.) Use a Ethernet cable (not provided) and connect one end to the “Network” port of the HMPS2U. Connect the other end to an available LAN Port on your network router. 2.) Plug in the power adaptor (included in package) to power on the print server.
SOFTWARE INSTALLATION Step 3A: Installing Software on Windows 1.) Insert Hawking software Setup CD. 2.) When the auto-load page appears, click Setup Wizard. 3.) Click Next button in proceeding installation windows until it completes.
Page 8
SOFTWARE INSTALLATION Step 3B: Installing Software on Mac 1.) Insert Hawking software Setup CD. 2.) When the setup page appears, click on the HMPS2u Software 3.) Click on the the installer, choose “Install” when the window comes 4.) Type in your username/password for...
Page 9
Step 4: Configuring Your HMPS1U Print Server 1.) Open the Hawking Technologies HMPS2U Control Center. While the program is running, a Hawking icon should be displayed in your system tray in Windows or in your dock on Mac. Once opened it will automatically search...
SERVER CONFIGURATION Step 4: Configuring Your HMPS2U 2.) Double click on the device on the control center and it will open a web browser showing the user interface of the product 3.) Click on “Config.” You will be prompted to put in a username/password.
Page 11
Click submit if you have made changes. Otherwise, continue to the next step if you wish the HMPS2U to be wireless (go on to Step 5 if you wish to remained wired to the network).
If your network uses security, under the security settings, your security type will be listed. Please type in your key or pass- phrase. Click ‘Submit’ for your settings to take effect. Disconnect the ethernet cable and your HMPS2U is now wireless.
Page 13
Step 5: Setting up a USB Device Windows 1.) Plug your USB device into one of the avail- able ports on the HMPS2U Open your control center. You should see the device appear beneath the HMPS2U. Here, we use a printer as an example.
DEFAULT PARAMETERS EfaulTS Some of the important default parameters for your HMPS2U are shown below. - Administrator: admin - Password: admin - Server Name: HMPS2U - Workgroup: WORKGROUP - Static IP: 192.168.1.100...
For additional information or troubleshooting help regarding the advanced usage and configuration of your device, please refer to the User’s Manual on the Setup CD. If you have technical difficulties using the product, Hawking Technologies offers free technical support to assist you.