Sony STR-DH750 Help Manual page 242

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Checking Auto Calibration results
To check error codes or warning messages received in [Auto Calibration], proceed with the following steps:
1. Select [WRN Check].
If a warning message appears, check the message and use the receiver without change. Or if necessary,
perform Auto Calibration again.
For details on the warning messages, see
When error code appears
Check the error and perform Auto Calibration again.
Hint
The measurement results may vary depending on the position of the subwoofer. However, continuing to use
the receiver with that value does not cause problems.
Related Topic
List of messages after Auto Calibration measurements
"List of messages after Auto Calibration
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
235
measurements."