Sony STR-DH750 Help Manual page 124

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Setting the assignment for the speaker terminals (SB Assign) (for STR-DH750 only)
You can select the speaker pattern and set the assignment for the SPEAKERS SURROUND BACK/BI-
AMP/FRONT HIGH/FRONT B terminals.
1. Select [Settings] - [Speaker Settings] from the home menu.
2. Select [SB Assign].
3. Set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals.
Speaker B: Select if you connect an additional front speaker system to the SPEAKERS SURROUND
BACK/BI-AMP/FRONT HIGH/ FRONT B terminals.
Bi-Amp: Select if you connect front speakers to the SPEAKERS SURROUND BACK/BI-AMP/FRONT
HIGH/ FRONT B terminals using a bi-amplifier connection.
Off: Select if you connect surround back or front high speakers to the SPEAKERS SURROUND
BACK/BI-AMP/FRONT HIGH/ FRONT B terminals.
Note
When you change the connection from a bi-amplifier or speakers front B to surround back or front high
speakers connection, set the [SB Assign] to [Off], then set up the speakers again.
You can only set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B
terminals if the speaker pattern is set to 2/0, 2/0.1, 3/0, 3/0.1, 2/2, 2/2.1, 3/2, or 3/2.1.
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
117