Default Settings - Atlantis Land A02-RA242-W54_GX01 Quick Start Manual

ENGLISH
ADSL, if suitably connected, at first will be flashing and then
it will remain fixed.

1.5 Default Settings

The WebShare 242W Wireless ADSL2+ Router can be
configured with your Web browser. The web browser is
included as a standard application in following operation
systems, UNIX, Linux, Mac OS, Windows
95/98/NT/2000/Me, etc. The product provides a very easy
and user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-
attached PCs that communicate with the WebShare 242W
Wireless ADSL2+ Router , either to configure the device, or
for network access. These PCs must have an Ethernet
interface installed properly, be connected to the WebShare
242W Wireless ADSL2+ Router either directly or through
an external Switch, and have TCP/IP installed and
configured to obtain an IP address through a DHCP server
or a fixed IP address that must be in the same subnet of the
WebShare 242W Wireless ADSL2+ Router . The default IP
address of the WebShare 242W Wireless ADSL2+ Router is
192.168.1.254 and subnet mask is 255.255.255.0. The best
and easy way is to configure the PC to get an IP address
from the WebShare 242W Wireless ADSL2+ Router (DHCP
client).
Please follow the steps below for PC's network environment
installation. First of all, please check your PC's network
components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS
Windows relative manuals.
Before you configure this WebShare 242W ADSL2+
Wireless Router, you need to know the following default
settings:
•
Username:admin
27