Atlantis Land A02-RA142-W54 User Manual page 49

The MAC filter screen allows you to configure the router to give exclusive access
to up to 32 devices (Allow Association) or exclude up to 32 devices from
accessing the router (Deny Association). Every Ethernet device has a unique
MAC (Media Access Control) address.
The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:AA:BB:00:00:02. You need to know the
MAC address of the devices to configure this screen.
To change your router's MAC filter settings, click Wireless LAN, MAC Filter to
open the MAC Filter screen. The screen appears as shown.
Label
Activated/Deactivated Select Actived to enable MAC address filtering.
Action
MAC Address
Wireless MAC Address Filter
Description
Define the filter action for the list of MAC addresses in
the MAC address filter table.
Select Deny Association to block access to the router,
MAC addresses not listed will be allowed to access the
router.
Select Allow Association to permit access to the router,
MAC addresses not listed will be denied access to the
router.
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX
format) of the wireless station that are allowed or denied
access to the router in these address fields.
A02-RA142-W54
WebShare 142W
Pag. 39