If You Are Unable To Finish The Descaling Procedure - Philips Saeco Xsmall HD8645 User Manual

ENGLISH
24
5 sec
4 Press the espresso button and brew a cup of espresso. Repeat this
twice.
5 Turn the control dial to the hot water icon.
6 Let hot water flow out of the hot water/steam wand until the
'water tank empty' light illuminates continuously.
Note: If you want to interrupt the water flow, turn the control dial back to the
coffee bean icon. To restart the water flow, turn it back to the hot water icon.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the classic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water filter (if present).
11 Fill the water tank with fresh water up to the MAX indication and
slide the water tank back into the machine.
12 Press the on/off button to turn off the machine.
When you turn the machine back on, it is ready for use again.
,

If you are unable to finish the descaling procedure

If the machine gets stuck in the descaling procedure, you can press the on/off
button.This allows you to complete the descaling procedure. Follow the steps
below to make sure your machine is ready to brew coffee again.
1 Press the espresso button and regular coffee button simultaneously
for approximately 5 seconds.
2 Remove the drip tray, rinse it and place it back.
3 Remove the water tank and rinse it.
4 Fill the water tank with fresh water up to the MAX indication and
slide the water tank back into the machine.
5 Press the espresso button and brew a cup of espresso.
Repeat this twice.
6 Turn the control dial to the hot water icon. Let hot water flow out
of the hot water/steam wand until the 'water tank empty'
light illuminates continuously.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the classic milk frother.