Basic Controls - Panasonic TH-42LF25U Operating Instructions Manual

Basic Controls

Main Unit
Brightness Sensor
Detects the brightness in the viewing
environment.
Speakers
POWER
Main Power On / Off Switch
12
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will still
• Standby ......... Red
• Power-ON ...... Green
Remote control
• POWER MANAGEMENT (DPMS)
sensor
....................... Orange (With PC input signal. )
When this function is set to ON, it operates under the
following conditions to turn the power on or off automatically.
When no pictures are detected for 30 or so seconds during
PC signal input:
When pictures are subsequently detected:
• NO SIGNAL POWER OFF
.......................Red
Equipment power supply is turned OFF when there is no signal.
When this is set to "ENABLE", the power supply of the
unit goes Off 10 minutes after the input signals stop.
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 14)
Normal Viewing
SOUND
INPUT button (Input signal selection)
(see page 11)
consume some power as long as the power
cord is still inserted into the wall outlet.)
→ Power is turned off (standby); the power indicator
lights up orange.
→ Power is turned on; the power indicator lights up
green.
Enter / Aspect button
(see page 14)
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 14)
PICTURE SET UP
POS. /SIZE