Playing Back With The Noise Canceling Function - Sony ICD-SX713 Operating Instructions Manual

• Make sure to remove the stereo headphones
for noise canceling from your ears before
you connect or disconnect the stereo
headphones from the headphone jack of the
IC recorder. If the stereo headphones are
connected or disconnected from the IC
recorder during playback, or while the noise
canceling function is active, noise may be
generated. This is not a malfunction.
• When the noise canceling function is turned
on or off, a switching sound will be
generated. This sound is generated by the
switch of the noise canceling circuit, and is
not a malfunction.
Playing back with the noise
canceling function
i (headphone) jack
x STOP
N /ENT
v , V
1
Connect the supplied stereo headphones
for noise canceling to the i (headphone)
jack.
2
(Playback) tab t "Noise
Select the
Cancellation" in the menu when the IC
recorder is in the stop or playback mode,
and then press /ENT.
N
3
Press or on the control button to
v V
select "ON/OFF," and then press
ENT.
4
Press or on the control button to
v V
select "ON," and then press
"Noise Cancellation" is set to "ON"
when you purchase the IC recorder.
5
Press STOP to exit the menu mode.
x
/
N
N /ENT.
73 GB