Netopia 4622 T1 Getting Started Manual page 30

T1 router
Table of Contents

Advertisement

6-4 Getting Started Guide
Data Circuit
(ATM Operation Mode only)
Address Translation
Enabled:
IP Addressing:
(for Frame Relay DLEs only)
Frame Relay Management
Type:
(for PPP DLEs only)
PPP Authentication:
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name
Server:
Secondary Domain Name
Server:
Default IP Gateway:
Write Access Name:
Write Access Password:
RFC1483
or
HDLC
VPI (0-255):
(default is 0)
VCI (32-65535):
(default is 35)
Easy Setup Profile Screen
Yes (default) or
No
Numbered (default) or
Unnumbered
ANSI (Annex D)
CCITT (Annex A)
LMI
None
None (default),
PAP or
CHAP
IP Easy Setup Screen
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
Easy Setup Security Configuration Screen
_______________________
_______________________
RFC1483 Mode:
Bridged 1483 (default) or
Routed 1483
_______________________
_______________________
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(192.168.1.1
255.255.255.0
are defaults)
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
Off (default) or
On
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________

Advertisement

Table of Contents
loading

This manual is also suitable for:

4622

Table of Contents