Advertisement
Quick Start Guide - TeamBoard T4
Calibration for Windows
Filled TeamBoard
If your projected image completely fills the TeamBoard without
overlapping the frame you will not need to calibrate the
TeamBoard.
To provide calibration samples, tap the crosshair each
time that it appears on the screen.
Right-click anywhere on the screen to return to the last
calibration point. Press the "Esc" button to close the tool.
Do not change your screen orientation until you have
completed the calibration process.
1-800-263-2387 +1-905-851-2826 support@teamboard.com
Partially or Overfilled TeamBoard
If your projected image does not completely fill the TeamBoard
or it overfills the TeamBoard and overlaps the frame, please adjust
your projector first. If this is not practical, please follow the
instructions below.
1. Open the Start menu and select Control Panel.
2. Ensure Icons are showing.
To show Icons, A) Select Category, next to "View By." B) Click large
or small icons.
3. Open "Tablet PC Settings".
Page 4
4. If this is your first TeamBoard, skip to step 5. Otherwise, click
"Reset".
5. Click "Calibrate."
6. Touch all the calibration points as prompted.
7. Click "OK" and close Control Panel.
Your TeamBoard is now calibrated.
Register your TeamBoard T4 online at TeamBoard.com
Advertisement
