Toyota AVALON Hybrid Dismantling Manual page 21

Gasoline-electric hybrid synergy drive
Hide thumbs Also See for AVALON Hybrid:
Table of Contents

Advertisement

8. After disconnecting or exposing a high-voltage
connector or terminal, insulate it immediately
using insulating tape. Before disconnecting or
touching a bare high-voltage terminal, wear
insulated gloves.
9. Check the HV battery and nearby area for
leakage. If you find any liquid, it may be
strong alkaline electrolyte. Wear rubber
gloves and goggles and neutralize the liquid using a saturated boric acid solution or
vinegar. Then wipe up the liquid using waste rags etc.
10. If the electrolyte comes into contact with your skin, wash the skin immediately using a
saturated boric acid solution or a large amount of water. If the electrolyte adheres to any
article of clothing, take the clothing off immediately.
11. If the electrolyte comes into contact with your eye(s), call out loudly for help. Do not rub
your eye(s). Instead, wash the eye(s) with a dilute boric acid solution or a large amount
of water and seek medical care.
12. With the exception of the HV battery, remove parts by following procedures which are
similar to conventional Toyota vehicles. For the removal of the HV battery, refer to the
following pages.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents