10-2-4 Installing the Wall Mount Kit(LW15M23CP, LW17M24CP)
Note : This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Bracket
How to assemble the Wall Mount Kit
1. Mark the location of hole on the wall using
1
installation guide.
2. Make over 35mm- depth- hole on the marked
location using 5.0-diameter drill.
3. Fix anchors on each hole on the wall.
4. Connect bracket to the wall with screws after fit
ting anchors into the bracket holes.
Note : If the bracket is not firmly fixed to the wall,
LCD TV can fall off.
You may use LCD TV right after fixing it to the wall
2
since stand is wrapped already turned over as
shown in the picture below.
When using LCD TV in stand-based form, place
3
the product on a cushion or other soft materials.
Then turn over stand following the arrow direction
below only after pressing button on the connected
part where LCD TV is attached to stand.
(Turn over stand in the opposite direction after
pressing button when using LCD TV in wall-mount-
ed form as well.)
Anchors : 3EA
Anchors : 3EA
10 Operating Installations and Installation
Installation Guide
10-9