Netopia Network Adapater User Manual page 53

3) Refering to Figure 8-6 , click Browse, search for the correct .DLF file and click Upload to
begin Firmware Update.
4) Click Cancel Update if you want to abort Firmware Update.
As the uploading process will take about 1minutes, please do not turn off the VOIP
5) Firmware Updating is successful if GUI as shown in Figure 8-7 is displayed.
6) As by default the VOIP ATA is set to Static IP, please refer to 4.1.1 on How to Access the GUI.
User Guide
Figure 8-6: Uploading .DLF file
Warning!
ATA.
Figure 8-7: Firmware Update Successful
User Guide 8-53