Admin / Username Password Configuration - Netopia Network Adapater User Manual

HTTP Password Protection: This field allows you to enable or disable the HTTP
authentication. (Default is Disabled)
FTP Server:
This field allows you to enable or disable the FTP server connection. (Default is Enabled)
• Disable WAN side FTP access: This will disable WAN side access to the FTP server.
(Default is Disabled)
TFTP Server:
This field allows you to enable or disable the TFTP connection. System default is Disabled.
SNTP Client:
SNTP: Simple Network Time Protocol is an efficient method of obtaining the time from a Time
Server.
Time Zone: This specifies the time zone (geographical location).
Daylight Saving Time: Select to enable or disable Daylight Saving Option.
User Defined Time Server: Specified the IP address of your preferred SNTP server
When the VOIP ATA is successfully connected to the SNTP server, the system log will

8.2 Admin / Username Password Configuration

This page allows you to change password for the administrator.
Enter the password in both of the text fields. Make sure that the password is at least 8
characters long and do not contain '&'. (Default Password is epicrouter)
reflect the updated time
Figure 8-2 Admin Username / Password Configuration
User Guide
TIP!
User Guide 8-49