Table of Contents
Advertisement
Site Survey
6. Authentication: Authentication mode used within the network, including Open, WEP-Key,
WPA-PSK and WPA.
7. Network Type: Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network.
Connected network:
1. When the Netopia 3D REACH Utility is running, it will automatically select the best
Access Point to which to connect.
2. If you want to connect to another Access Point, you can double click on the desired
Access Point to make the connection.
3. If the desired network has encryption other than "Open", the Netopia 3D REACH Utility
will display the security page and let you input the appropriate information to make the
connection. Refer to section 4 on how to fill in the security information.
This icon indicates the connection is successful.
Indicates the connection status; the connected network's SSID will show up here.
The numbers of SSID found in your surrounding wireless network.
Issue a rescan command to the wireless device to update information on the surround-
ing wireless network.
Command to connect to the selected wireless network.
Add the selected Access Point to the Profile setting. It will display the Profile page and
save your setting to the profile setting.
7
Hide quick links:
Advertisement
Table of Contents
