Using Driver Alert - Ford Focus Quick Reference Manual

Hide thumbs Also See for Focus:
Table of Contents

Advertisement

Move forwards at a maximum speed of 30
kph (18 mph). Press the active park assist
control switch. Use the direction indicator
Drive slowly to position A, then follow the
system instructions.
Move the vehicle backwards cautiously
using the accelerator and brake pedals to
control the vehicle. Stop the vehicle when
you hear a continuous tone.
DRIVER ALERT
The system automatically monitors your
driving behavior using various inputs
including the front camera sensor.
If the system detects that you are becoming
drowsy or there is a deterioration in your
driving, the system will alert you.
Focus (CB8) , CG3564en enGBR, Edition date: 02/2014, None
lever to select searching either to the
left-hand side or right-hand side of the
vehicle.

USING DRIVER ALERT

Switching the system on and off
Note: The system status will remain
unchanged during ignition cycles.
Activate the system using the information
display.
Once activated the system will calculate
your alertness level based upon your driving
behavior in relation to the lane markings,
and other factors.
System warnings
Note: The system will not issue warnings
below approximately 65 km/h (40 mph).
13

Advertisement

Table of Contents
loading

Table of Contents