Toro Z Master Commercial 2000 74141TE Operator's Manual page 9

106-5517
1. Warning—do not touch the hot surface.
107-3069
1. Warning–there is no rollover protection when the roll bar is
down.
2. To avoid injury or death from a rollover accident, keep the
roll bar in the fully raised and locked position and wear
the seat belt. Lower the roll bar only when absolutely
necessary; do not wear the the seat belt when the roll bar is
down.
3. Read the Operator's Manual; drive slowly and carefully.
107–3969
1. Warning—read the Operator's Manual.
2. Crushing hazard, mower—1) Engage the parking brake,
stop the engine, and remove the ignition key; 2) Properly
jack the machine before working under the machine.
1. Read the Operator's
Manual.
2. Read the instructions
before servicing or
performing maintenance.
1. Warning—stay away from moving parts; keep all guards in
place.
1. Main, 25A
2. PTO, 10A
1. Parking brake—engaged
9
112-3858
3. Remove the ignition key
before adjusting the height
of cut.
4. Height of cut settings.
112-9028
114-4466
3. Charge, 25A
4. Auxiliary, 15A
116-5988
2. Parking
brake—disengaged