Tidying cables
1 Gather and bind the cables with the Cable
Holder on the TV back cover.
CAUTION
y Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
Cable Holder
ASSEMBLING AND PREPARING
Not using the Desk-Type
Stand
Only 32LS3450
y When installing the wall mounting bracket,
use the Protection cover. This will protect
the opening from accumulating dust and dirt.
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
NOTE
(Only 32LS345*)
y When removing Protection Cover from
bottom of TV, firstly place the screen facing
down on a cushioned table or flat surface to
protect screen from scratches. Then insert
your fingers into hole of cover hold firmly
and pull upwards towards you to remove.
Protection cover
19
Protection cover