Table of Contents
Advertisement
Where
<interface type>
Shutdown
The
command let you shutdown this particular interface. You can reverse this
shutdown
command by using the
Syntax
FSM726(config-if)# Shutdown
Spanning Tree
The
spanning-tree
spanning-tree operation, items such as port cost and priority is configured through this command.
Syntax
FSM726(config-if)# spanning-tree [cost <1-65535> | port-priority <0-255> | fastlink ]
Where
= the cost of the port, ranges from 1-65535
Cost <1-65535>
port-priority <0-255>
= enables Fastlink, a mode that bypasses the listening & learning phase of Spanning
fastlink
Tree
Speed
Syntax
FSM726(config-if)# speed <speed>
Where
= the speed of the port. The options are 10, 100, 1000, or auto (for automatic speed
<speed>
configuration).
Command Line Interface
700 Series Managed Switch User's Guide for Software v2.1
= Options for this field include
command.
no shutdown
command lets you configure the variables of the port that affects its
= the priority of the port, ranges from 0-255
SM-10004-02
and
.
gbic
tp
6-17
Advertisement
Table of Contents
