Table of Contents
Advertisement
•
After installing the driver of USB, there will be
another pop-up window to guide you to keep
installing the driver of USB Dongle.
•
Click "Next >". Select "Install the software
automatically
"Next>". In next window, click "Continue
Anyway" then click "Finish".
•
To make sure if the installation is successful,
you
management.
1.4 Utility
Once the installation is successful, a utility program icon will
show on your desktop (108Mbps Wireless Network USB
Dongle Configuration Utility). To lunch the utility, just double
click the icon.
In the Configuration Utility, select "Site Survey" tab, and
click "Refresh" button to search the available wireless
network(s). Select the network you want.
1.
If you have not enabled wireless encryption on
your network, then just click "Connect" button to
activate wireless connection immediately.
2.
If the wireless encryption is enabled click
"Connect" button then choose encryption and
put correct password on the next page, then
click on Apply.
3.
If doesn't show any available wireless network,
click "Add" button to setup encryption and SSID.
Wireless 108Mbps USB Adapter
(recommended)"
could
check
it
through
then
click
the
device
Advertisement
Table of Contents
