Information Display - Panasonic NV-VP60GL Service Manual

6.5.4. ATTENTION FOR REPLACING THE
CYLINDER UNIT
CAUTION:
Handle the Cylinder Flexble Card with care. When it
damaged, you should replace it with a new Cylinder Unit.
1. Put the gloves on your hands.
2. Turn the Cylinder Unit over.
3. Insert the FPC HOLDER to the Cylinder Unit.
4. Hook the Flexible Card to the FPC HOLDER.
Fig. S11
Fig. S12
NOTE:
1. When removing the FPC HOLDER, push stopper
portion of the FPC HOLDER with a small minus screw
driver and so on. And then pay attention for not to
scratch the Cylinder and not to break the Head Chip.
2. FPC HOLDER is not reuseable.
If removed, install a new one.
6.5.5. FLAT CARD CABLE
INSTALLATION
When installing the Flat Card Cable on the connector, install
the Flat Card Cable with the cable contacts facing the
connector contacts.
6.6. SELF-DIAGNOSIS & SERVICE

INFORMATION DISPLAY

Refer to the Service Manual for R4 Mechanism Chassis.
(Order No.: VRD0202010C8).
17
NV-VP60GL / NV-VP60GC / NV-VP60GCS
Fig. S13
Fig. S14