Pioneer DV-636D Service Manual page 84

DV-636D
QQ
3 7 63 1515 0
1
STANDBY indicator (except for LBXJ Types)
Indicates that the player is in standby, using a minimum
amount of power to maintain system settings.
2
CENTER button
Press to turn the center speaker channel on and off when
listening to sources being output from the 5.1 channel discrete
audio outputs.
3
SURROUND button
Press to turn the surround (rear) speaker channels on and off
when listening to sources being output from the 5.1 channel
discrete audio outputs.
4
SUB WOOFER button
Press to turn the sub-woofer (LFE) channel on and off when
listening to sources being output from the 5.1 channel discrete
audio outputs.
5
5.1CH MODE button
Press to switch the audio output between 5.1 channel audio
and 2 channel audio. It is also possible to set the default audio
output in the Setup screen Audio 2 menu.
6
5.1CH indicator
Indicates that the 5.1CH mode is selected.
7
VIRTUAL DOLBY DIGITAL indicator
Indicates that the Virtual Dolby Digital function is on.
TE
L 13942296513
8
FL OFF indicator
Indicates that the player's display window has been turned off
using FL DIMMER.
9
Display window
Displays system information.
0
Remote sensor
Point the remote control toward the remote sensor to operate
the player.
-
0 (open/close) button
Press to open and close the disc tray.
=
7 (stop) button
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it
stopped. Pressing twice causes the disc to return to the
beginning of the disc if playback starts again.
~
8 (pause) button
Press during playback to pause. Press again to resume
playback.
!
3 (play) button
Press to start or resume playback.
www
@
¡ ¢ (forward) button
Press to advance to chapters/tracks. Press and hold to perform
fast-forward scanning.
.
84
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
#
4 1 (reverse) button
Press to go back to previous chapters/tracks. Press and hold to
perform reverse playback scanning.
$
Disc illumination
Lights when a DVD is loaded and when no disc is loaded.
Turns off when a disc format other than DVD is loaded in the
player.
%
Disc tray
When loading a disc, place discs in the disc tray with the label
side facing up.
^
FL DIMMER button
Press to change the brightness of the FL display and disc
illumination in four steps: maximum brightness, medium
brightness, minimum brightness, and off. When the FL display
is turned off, the "FL OFF" indicator lights.
&
SUBTITLE button
Press repeatedly to select one of the subtitle languages
programmed on a DVD or to turn the subtitles off.
*
AUDIO button
Press repeatedly to select one of the audio languages
programmed on a DVD.
For Video CD and CD, each press changes the audio output as
follows.
=
=
Stereo 1/L (Left)
Q Q
3 6 7 1 3 1 5
(
VIRTUAL DOLBY DIGITAL button
Press to turn the Virtual Dolby Digital function on and off.
)
POWER switch (except for LBXJ Type)
Press to switch the player on or off.
_
STANDBY/ON button (LBXJ Type only)
Press to switch the player on or to put in standby.
co
.
9 4 2 8
=
2/R (Right)
0 5 8 2 9 9 4 2 8
m
9 9
9 9